Save time, simplify your install and get out on the trail.
The Trigger System eliminates the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It adds functionality such as a battery-powered RF remote control for activating installed accessories from outside the vehicle, dimming and flashing functions for lighting, fused circuits with LED indicators to notify of blown fuses and more. The included RF remote has backlit rocker switches and can be programmed for security or use with additional remotes. It utilizes a universal mounting system to accommodate numerous mounting surfaces. Several Trigger control boxes and remotes can be used together to control up to 24 accessories. Another option for control is the Trigger Bluetooth® App that will allow control of the on/off, dimming or flashing functions when used with LED or conventional lighting.
Six Shooter Control Box:
Six channels, 2x 30-Amp circuits, 2x 10-Amp circuits, 2x 5-Amp circuits, all solid state
30-Amp, 10-Amp and 5-Amp fuses built-in with waterproof cover
100-Amp fuse installed on positive input wire for protection
Programmable RF remote with backlit rocker switches
Built-in Bluetooth® battery voltage monitor
Manual on/off buttons on top of case
Bluetooth® control from phone or tablet app
Waterproof case design withstands temps up to 250°F and below freezing
LEDs to indicate relay on and if fuse is blown; blue for circuit on, red for blown fuse
12- to 24-Volt input by three wires: ground, switched positive, battery positive
Low-voltage shut down if battery voltage gets low
DIN connector built-in for manual control with conventional toggle switches; harness sold separately
Three-year limited manufacturer's warranty
RF Remote:
Universal mount designed for flat or round surfaces or roll bars
Weatherproof design
2.4 GHz frequency
Custom switch labels included
Replaceable battery power and/or 12-Volt hardwired optional
When hardwired, provides a color changing option adjustable from within app
Individual switch backlights activate when docked in powered remote base
App Control:
Apps for both Android and iOS with simple interface for turning on/off four or six channels
Dimming and strobe functions in addition to on/off
Allows customized names for each channel
Battery voltage shows on screen (Six Shooter only)
Control backlight color in the RF switch pad (Six Shooter Only)
Set battery low-voltage notifications
Harnesses:
Kit includes 8 ft. wiring harness for each channel in sturdy vinyl shrouds with a mating connector to the control box on one end and blank wires on the other
Two 12-gauge harnesses, two 14-gauge harnesses and the Six Shooter includes two 18-gauge harnesses as well